BAUMER HUBNER編碼器

發(fā)布時(shí)間： 2009-12-09　　點(diǎn)擊次數(shù)： 2571次

Baumer Hubner HeavyDuty incremental encoders are characterized by the following excellent features:

Robust construction with solid light alloy housing for high vibration and shock proof protection.
Bearings at both ends of the shaft, where construction permits.
Short-circuit proof power transistors with peak currents up to 300 mA for line driving over long cables with HTL-signals or optional TTL-signals to RS-422.
High Electromagnetic Compatibility （EMC）, tested to IEC 801-4.
Protection against shaft currents due to insulated ball bearings, in some devices.
Incremental encoders without bearings for drives with large axial play or high speeds.
Through-hole hollow shaft, also available in Sinus-Technology and in explosion proof execution "II 2 G EEx de IIC T6".
Wide range of program with standard EURO-Flange B10.
Rear shaft option for mounting of other devices.
Combinations with common shaft:
- Incremental encoder + Incremental encoder （Twin Tacho）,
- Incremental encoder + Analog-Tacho,
- Incremental encoder + Speed Switch.

Incremental Encoders are devices for measuring speed and position in drive technology

All Baumer Hübner devices are covered by a two-year warranty subject to the conditions of the Association of the German Electrical Engineering Industry （ZVEI）.

... with own bearings
OG 6
Square-wave cycles per turn:	100 - 512	Servo flange
Max. output frequency:	120 kHz	Solid shaft d= 6 mm
Logic level:	HTL （C）, TTL, TTL （R）
Permissible encoder temperature:	-20 °C to +70 °C
Connection:	Internal connection terminals
Weight:	approx. 200 g
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 54	Ex II 3G 3D

OG 60 • HOG 60
Square-wave cycles per turn:	max. 10,000	Servo flange （OG 60）
Max. output frequency:	250 kHz	Solid shaft d= 6 mm （OG 60）
Logic level:	HTL （C）, TTL, TTL （R）	Hollow shaft with clamping ring up to d= 12 mm （HOG 60）
Permissible encoder temperature:	-30 °C to +85 °C	Hollow shaft with clamping ring up to d= 12 mm （HOG 60）
Connection:	Plug connection	High resolution
Weight:	approx. 260 g （OG 60） approx. 250 g （HOG 60）
Shock resistance （6 ms）:	3,000 m/s²
Protection class:	IP 65	Ex II 3G 3D

OG 70 • HOG 70
Square-wave cycles per turn:	50 - 10,000	Servo flange （OG 70）
Max. output frequency:	250 kHz	Solid shaft d= 6 mm （OG 70）
Logic level:	HTL （C）, TTL, TTL （R）	Hollow shaft up to d= 14 mm （HOG 70）
Permissible encoder temperature:	-20 °C to +85 °C	Hollow shaft up to d= 14 mm （HOG 70）
Connection:	Internal connection terminals
Weight:	approx. 360 g （OG 70） approx. 240 g （HOG 70）
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

OG 71 • HOG 71
Square-wave cycles per turn:	OG 71: 100 up to 1,024 HOG 71: 64 up to 2,048	Servo flange （OG 71）
Max. output frequency:	120 kHz	Solid shaft d= 6 mm （OG 71）
Logic level:	HTL （C）, TTL, TTL （R）	Hollow shaft up to d= 14 mm （HOG 71）
Permissible encoder temperature:	-20 °C to +85 °C	Hollow shaft up to d= 14 mm （HOG 71）
Connection:	Internal terminal strip
Weight:	approx. 360 g （OG 71） approx. 240 g （HOG 71）
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

AHE 7 • AFE 7
Square-wave cycles per turn:	60 - 5,000	Version US of OG 71/•HOG 71
Max. output frequency:	120 kHz	1/2" hollow shaft （AHE 7）
Logic level:	HTL （C）, TTL, TTL （R）	3/8" servo flange （AFE 7）
Permissible encoder temperature:	-30 °C to +70 °C	NPT 1/2" fitting
Connection:	Internal connection terminals
Weight:	approx. 240 g （AHE 7） approx. 380 g （AFE 7）
Weight:	approx. 240 g （AHE 7） approx. 380 g （AFE 7）
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56

HOG 75 • HOG 75 K
Square-wave cycles per turn:	250 - 2,500	Through-hole hollow shaft with clamping ring up to d= 26 mm （HOG 75）
Max. output frequency:	120 kHz
Logic level:	HTL, TTL	Cone shaft 1:10 （HOG 75 K）
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Internal connection terminals
Weight:	approx. 320 g
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

OG 8 • HOG 8
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11mm （OG 8）
Max. output frequency:	120 kHz	Through-hole hollow shaft with clamping ring up to d= 16 mm （HOG 8）
Logic level:	HTL （C）, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Internal connection terminals
Weight:	approx. 700 g （OG 8） approx. 550 g （HOG 8）
Weight:	approx. 700 g （OG 8） approx. 550 g （HOG 8）
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 54

OG 9
Square-wave cycles per turn:	1 - 1,250	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Terminal box
Weight:	approx. 900 g
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 55	Ex II 3G 3D

OG 90
Square-wave cycles per turn:	1,000 - 10,000	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	250 kHz	High HTL output current
Logic level:	HTL （C）, TTL, TTL （R）	High resolution
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Terminal box
Weight:	approx. 1.5 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 55

HOG 9 • HOG 9 G
Square-wave cycles per turn:	1 - 2,500	Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz	Hollow shaft with clamping element up to d= 16 mm
Logic level:	HTL, TTL, TTL （R）	Option: Cone shaft 1:10
Permissible encoder temperature:	-30 °C to +100 °C	High HTL output current
Connection:	Plug connection	Bearing at each end
Weight:	approx. 700 g （HOG 9）	Protection against shaft currents
	approx. 1,100g （HOG 9G）	Twin encoder HOG 9 G
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

FOG 9
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Plug connection
Weight:	approx. 860 g
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

POG 9
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C	Twin encoder POG 9 G
Connection:	Terminal box
Weight:	approx. 1.3 kg
Shock resistance （1 ms）:	3,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

POG 9 G
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Terminal box
Weight:	approx. 1.7 kg
Shock resistance （1 ms）:	3,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

POG 90
Square-wave cycles per turn:	1,024 - 10,000	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	250 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-20 °C to +85 °C	High resolution
Connection:	large terminal box
Weight:	approx. 1.5 kg
Shock resistance （11 ms）:	1,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

HOG 10
Square-wave cycles per turn:	1 - 2,500	Hollow shaft with clamping element up to d= 20 mm
Max. output frequency:	120 kHz	Hollow shaft with clamping element up to d= 20 mm
Logic level:	HTL, TTL, TTL （R）	Option: Cone shaft 1:10
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C （optional）	High HTL output current
Connection:	Internal connection terminals or large terminal box	Protection against shaft currents
Weight:	approx. 1.6 kg	Twin encoder HOG 10 G
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

HOG 10 G
Square-wave cycles per turn:	1 - 2,500	Hollow shaft with clamping element up to d= 20 mm
Max. output frequency:	120 kHz	Hollow shaft with clamping element up to d= 20 mm
Logic level:	HTL, TTL, TTL （R）	Option: Cone shaft 1:10
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C （optional）	High HTL output current
Connection:	Large terminal box	Protection against shaft currents
Weight:	approx. 2.2 kg
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

HOG 100
Square-wave cycles per turn:	1,024 - 10,000	Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	250 kHz	Hollow shaft with clamping element up to d= 16 mm
Logic level:	HTL, TTL	Option: Cone shaft 1:10
Permissible encoder temperature:	-30 °C to +85 °C	High HTL output current
Connection:	Internal connection terminals or large terminal box	High resolution
Weight:	approx. 1.5 kg	Protection against shaft currents
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

POG 10
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C （optional）	Protection against inductive shaft currents with isolated coupling （e. g. K 35）
Connection:	Large terminal box
Weight:	approx. 1.6 kg	Twin encoder POG 10 G
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 66
Protection class:	IP 66	Ex II 3G 3D

POG 10 G
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	High HTL output current
Logic level:	HTL, TTL, TTL （R）	Bearing at each end
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C （optional）	Protection against inductive shaft currents with isolated coupling （e. g. K 35）
Connection:	Large terminal box
Weight:	approx. 2.4 kg
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 66
Protection class:	IP 66	Ex II 3G 3D

HOG 11 （Offshore）
Square-wave cycles per turn:	1 - 2,500	Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz	Option: Cone shaft 1:10
Logic level:	HTL, TTL, TTL （R）	Protection against inductive shaft currents
Permissible encoder temperature:	-30 °C to +100 °C	Special corrosion protection e.g. for offshore
Connection:	Large terminal box	Option: Hybrid bearing
Weight:	approx. 1.6 kg	Option: Earthing brush for capacitive shaft currents
Shock resistance （6 ms）:	2,500 m/s²	Option: Heating for use down to -55°C
Shock resistance （6 ms）:	2,500 m/s²	Twin encoder HOG 11 G
Protection class:	IP 67	Ex II 3G 3D

HOG 11 G （Offshore）
Square-wave cycles per turn:	1 - 2,500	Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz	Option: Cone shaft 1:10
Logic level:	HTL, TTL, TTL （R）	Protection against inductive shaft currents
Permissible encoder temperature:	-30 °C to +100 °C	Special corrosion protection e.g. for offshore
Connection:	Large terminal box	Option: Hybrid bearing
Weight:	approx. 2.2 kg	Option: Earthing brush for capacitive shaft currents
Weight:	approx. 2.2 kg	Option: Heating for use down to -55°C
Shock resistance （6 ms）:	2,500 m/s²
Protection class:	IP 67	Ex II 3G 3D

POG 11 （Offshore）
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	Protection against inductive shaft currents with isolated coupling （e. g. K 35）
Logic level:	HTL, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +100 °C	Special corrosion protection e.g. for offshore
Connection:	Large terminal box	Option: Hybrid bearing
Weight:	approx. 1.8 kg	Option: Heating for use down to -55°C
Shock resistance （6 ms）:	3,000 m/s²	Twin encoder POG 11 G
Protection class:	IP 67	Ex II 3G 3D

POG 11 G （Offshore）
Square-wave cycles per turn:	1 - 2,500	EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz	Protection against inductive shaft currents with isolated coupling （e. g. K 35）
Logic level:	HTL, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +100 °C	Special corrosion protection e.g. for offshore
Connection:	Large terminal box	Option: Hybrid bearing
Weight:	approx. 2.4 kg	Option: Heating for use down to -55°C
Shock resistance （6 ms）:	3,000 m/s²
Protection class:	IP 67	Ex II 3G 3D

HOG 12
Square-wave cycles per turn:	600, 1,024	Through-hole hollow shaft with clamping ring up to d= 45 mm
Max. output frequency:	120 kHz
Logic level:	HTL （C）, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Cable connection
Weight:	approx. 1 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 54

HOG 131 （Offshore）
Square-wave cycles per turn:	1,024 - 3,072	Through-hole hollow shaft with clamping ring up to d= 36 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL （R）
Permissible encoder temperature:	-40 °C to +100 °C
Connection:	Large terminal box
Weight:	approx. 4 kg
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

EGZ 14 • AG 14
Square-wave cycles per turn:	250 - 2,500	Through-hole hollow shaft up to d= 70 mm
Max. output frequency:	120 kHz	Especially for lift drives
Logic level:	HTL （C）, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +70 °C
Connection:	Plug connection （EGZ 14） Terminal box or plug connection （AG 14）
Weight:	approx. 1.2 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 20, IP 54

HOG 16
Square-wave cycles per turn:	250 - 2,500	Through-hole hollow shaft with clamping element up to d= 38 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL （R）	High HTL output current
Permissible encoder temperature:	-20 °C to +100 °C	Slip-ring earthing contact
Connection:	Terminal box	Option: Redundant scanning
Weight:	approx. 4 kg
Shock resistance （6 ms）:	3,000 m/s²
Protection class:	IP 66	Ex II 3G 3D

HOG 161
Square-wave cycles per turn:	250 - 2,048	Through-hole hollow shaft with clamping ring up to d= 75 mm
Max. output frequency:	120 kHz	Through-hole hollow shaft with clamping ring up to d= 75 mm
Logic level:	HTL, TTL, TTL （R）	Option: Redundant scanning
Permissible encoder temperature:	-20 °C to +85 °C
Connection:	Terminal box
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 54
		Ex II 3G 3D

HOG 163 （Offshore）
Square-wave cycles per turn:	250 - 5,000	Through-hole hollow shaft with clamping ring up to d= 75 mm
Max. output frequency:	120 kHz	Through-hole hollow shaft with clamping ring up to d= 75 mm
Logic level:	HTL, TTL, TTL （R）	Insulated bearings
Permissible encoder temperature:	-30 °C to +85 °C	Special corrosion protection
Connection:	Large terminal box	Option: Redundant scanning
Weight:	approx. 3.5 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56	Ex II 3G 3D

HOG 165 （Offshore）
Square-wave cycles per turn:	250 - 5,000	Hollow shaft with clamping element up to d= 38 mm
Max. output frequency:	120 kHz	Hollow shaft with clamping element up to d= 38 mm
Logic level:	HTL, TTL, TTL （R）	Special corrosion protection
Permissible encoder temperature:	-30 °C to +100 °C	Option: Protection against shaft currents
Connection:	Large terminal box	Option: Slip-ring earthing contact
Weight:	approx. 4 kg	Option: Redundant scanning
Shock resistance （6 ms）:	3,000 m/s²
Protection class:	IP 67	Ex II 3G 3D

HOG 22 • HOG 220
Square-wave cycles per turn:	HOG 22: （720 - 4,000） HOG 220: （1,024）	Through-hole hollow shaft with clamping ring up to d= 115 mm
Max. output frequency:	120 kHz
Logic level:	HOG 22: HTL （C）, TTL, TTL （R） HOG 220: HTL, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Terminal box or plug connection
Weight:	approx. 8.8 kg
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	HOG 22: IP 54 HOG 220: IP 56	Ex II 3G 3D

HOG 28
Square-wave cycles per turn:	1,024 - 2,048	Through-hole hollow shaft up to d= 150 mm
Max. output frequency:	120 kHz	Through-hole hollow shaft up to d= 150 mm
Logic level:	HTL （C）, TTL, TTL （R）
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Plug connection
Weight:	approx. 20 kg
Shock resistance （6 ms）:	2,000 m/s²
Protection class:	IP 54	Ex II 3G 3D

HML 131 M
Square-wave cycles per turn:	128 - 2,048	Hollow shaft up to d= 36 mm
Max. output frequency:	200 kHz	Operable under oil
Logic level:	HTL （C）, TTL, TTL （R）	Operable under oil
Permissible encoder temperature:	-20 °C to +90 °C	Magnetic sensing
Connection:	Special connector	Redundant sensing
Weight:	approx. 2.2 kg
Shock resistance （12 ms）:	2,000 m/s²
Protection class:	IP 68

... without own bearings

HG 6
Square-wave cycles per turn:	100 - 512	Servo flange
Max. output frequency:	120 kHz	Hollow shaft up to d= 16 mm
Logic level:	HTL （C）, TTL, TTL （R）	Rugged construction without own bearings for very high speeds
Permissible encoder temperature:	-20 °C to +85°C
Connection:	Internal connection terminals	Incremental disk protected in axial and radial direction
Weight:	approx. 180 g	Incremental disk protected in axial and radial direction
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56 / IP 23	Without own bearings

HG 16
Square-wave cycles per turn:	250 - 2,500	Through-hole hollow shaft with clamping ring up to d= 45 mm
Max. output frequency:	120 kHz	Through-hole hollow shaft with clamping ring up to d= 45 mm
Logic level:	HTL, TTL, TTL （R）	Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +100°C
Connection:	Terminal box, Option: Plug connection	Option: Redundant scanning
Weight:	approx. 2.4 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 56	Without own bearings

HG 18 • HG 22
Square-wave cycles per turn:	HG 18: 250 - 2,500 HG 22: 720 - 4,000	Through-hole hollow shaft with clamping ring up to d= 110 mm
Max. output frequency:	120 kHz
Logic level:	HTL （C）, TTL, TTL （R）	Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +70°C
Connection:	Terminal box, Option: Plug connection	Option: Redundant scanning
Weight:	HG 18: approx. 4.2 kg HG 22: approx. 5.8 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	HG 18: IP 54, HG 22: IP 44	Without own bearings

HG 21 • HG 211
Square-wave cycles per turn:	2,500	Through-hole hollow shaft up to d= 95 mm
Max. output frequency:	120 kHz Option: 160 kHz	Through-hole hollow shaft up to d= 95 mm
Logic level:	HTL （C）, TTL, TTL （R）	Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +70 °C
Connection:	Connector	Option: redundant scanning
Weight:	approx. 5.8 kg
Shock resistance （6 ms）:	1,000 m/s²
Protection class:	IP 44	Without own bearings

HMC 16 （M） + HEAG 158 V （M）
Square-wave cycles per turn:	128 - 8,192	Hollow shaft up to d= 55 mm
Max. output frequency:	2,000 kHz	Magnetic sensing
Logic level:	HTL, TTL	Magnetic sensing
Permissible encoder temperature:	-30 °C / 0 °C to +70 °C / 105 °C	Redundant sensing （optional）
Connection:	12 pin mating connector （male contacts）
Weight:	approx. 2.4 kg
Shock resistance （12 ms）:	3,000 m/s²
Protection class:	HMC 16 （M） - IP 68 HEAG 158 V （M） - IP 65

MHGE 100 B5
Square-wave cycles per turn:	64 ... 4096	Through-hole hollow shaft with d= 20 ... 80 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C	Option: additional incremental signals
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGE 200 B5
Square-wave cycles per turn:	128 ... 8192	Through-hole hollow shaft with d= 50 ... 180 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C	Option: additional incremental signals
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGE 400 B5
Square-wave cycles per turn:	256 ... 16384	Through-hole hollow shaft with d= 100 ... 380 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C	Option: additional incremental signals
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGE 800 B5
Square-wave cycles per turn:	512 ... 32768	Through-hole hollow shaft with d= 380 ... 740 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C	Option: additional incremental signals
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGP 100 B5
Square-wave cycles per turn:	64, 128, ... 1024, ... 131072	Through-hole hollow shaft with d= 20 ... 80 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C	Option: Error output
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGP 200 B5
Square-wave cycles per turn:	128, 256, ... 1024, ... 262144	Through-hole hollow shaft with d= 50 ... 180 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C	Option: Error output
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHGP 400 B5
Square-wave cycles per turn:	256, 512, 1024, ... 524288	Through-hole hollow shaft with d= 100 ... 380 mm
Logic level:	HTL, TTL	Large permissible axial displacement
Max. output frequency:	300 kHz	Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C	Option: Error output
Connection:	12 pole flange socket （ccw, pins）
Vibration resistance （55 Hz ... 2000 Hz）:	300 m/s²
Shock resistance （2 ms）:	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67

MHG 100 Download...
Square-wave cycles per turn:	64 - 1,024	Through-hole hollow shaft up to d= 80 mm
Maximum speed:	4,000 rpm	Through-hole hollow shaft up to d= 80 mm
Logic level:	HTL	Tangential magnetic sensing
Permissible encoder temperature:	-40 °C to +85 °C	Large mounting tolerances
Moment of inertia:	approx. 17 kgcm?
Shock resistance （12 ms）:	2,000 m/s?
Protection class:	IP 68	Without own bearings

MHG 150 Download...
Square-wave cycles per turn:	94 - 1,504	Through-hole hollow shaft up to d= 130 mm
Maximum speed:	4,000 rpm, Option: 12,000 rpm	Through-hole hollow shaft up to d= 130 mm
Logic level:	TTL	Tangential magnetic sensing
Permissible encoder temperature:	-40 °C to +85 °C	Large mounting tolerances
Moment of inertia:	approx. 18.4 kgcm? （d=130 mm, without marker pulse） approx. 33.67 kgcm? （d=130 mm, with marker pulse）	Option: Marker pulse
Moment of inertia:
Shock resistance （12 ms）:	2,000 m/s?
Protection class:	IP 68	Without own bearings

MHG 400 Download...
Square-wave cycles per turn:	256 - 2,048	Through-hole hollow shaft up to d= 380 mm
Maximum speed:	3,000 rpm	Through-hole hollow shaft up to d= 380 mm
Logic level:	HTL, TTL	Operation possible under oil or water
Permissible encoder temperature:	-20 °C to +95 °C	Tangential magnetic sensing
Moment of inertia:	approx. 1,118 kgcm? （d=380 mm）	Large mounting tolerances
Shock resistance （12 ms）:	2,000 m/s?	Option: Special corrosion protection
Protection class:	IP 68	Option: Cover
		Without own bearings

Technical modifications reserved.